共搜索到12872条信息,每页显示10条信息,共1288页。用时:0小时0分0秒453毫秒
Influence of annealing treatment on properties and microstructures of alumina dispersion strengthened copper alloy SONG Ke-xing(宋克兴)1, 2, XING Jian-dong(邢建东)1, TIAN Bao-hong(田保红)2,LIU Ping(刘 平... with an interparticle spacing of 30-100nm. The produced 0.12%ADSC can maintain more than 87% hardness retention after 900℃, 1h annealing treatment; the recrystallization can be largely retarded......
Effect of annealing treatment on electrochemical property of LiNi0.5Mn1.5O4 spinel ZHANG Bao(张 宝), WANG Zhi-xing(王志兴), GUO Hua-jun(郭华军) School of Metallurgical Science and Engineering, Central... prepared under different cooling conditions were investigated. The results show that LiNi0.5Mn1.5O4 synthesized with or without annealing treatment has similar X-ray diffraction patterns that can......
J. Cent. South Univ. (2021) 28: 1978-1989 DOI: https://doi.org/10.1007/s11771-021-4746-2 Annealing twin mechanism for 304 stainless steel solution treatment process JI Kai-sheng(纪开盛)1, SONG Guang... orientation Cite this article as: JI Kai-sheng, SONG Guang-sheng, SONG Hong-wu, ZHANG Shi-hong. Annealing twin mechanism for 304 stainless steel solution treatment process [J]. Journal of Central......
Article ID: 1003-6326(2005)02-0410-04 Effect of annealing treatment on optical and electrical properties of ZnO films WANG Wan-lu(王万录), LIAO Ke-jun(廖克俊), LI Li(李 丽), WU Zhi-hua(吴子华... of ZnO films can be further improved by annealing treatment. The crystallinity of ZnO films becomes better, and the optical gap energy is decreased, but thermoelectric power is enhanced after heat......
and ductility ((1305±25) MPa and (37±3) %, respectively). Key words: selective laser melting; Ti-6Al-4V; annealing treatment; microstructure; mechanical properties Cite this article as: WANG Pei, CHEN Feng-hua, J. ECKERT, S. PILZ, S. SCUDINO, K. G. PRASHANTH. Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment [J]. Journal of Central South......
. The mechanical properties were measured by tensile testing, with their crystal orientations analyzed by X-ray diffraction (XRD). After the annealing treatment, the elongated grains were transformed... rolling more difficult. The results indicate that the optimum annealing treatment during AZ31 alloys sheet rolling is at about 300 ℃ for 60-120 min. Key words: AZ31 alloys; rolling sheet; annealing......
EFFECT OF ANNEALING TREATMENT ON THE STRUCTURE OF CdS FILMS K.J.Liao1,G.B.Liu1,C.G.Hu1,L.H.Feng2,Q.Feng1,W.L.Wang1 (1.Department of Applied Physics, Chongqing University, Chongqing 400044, China...) Abstract:The effect of annealing treatment on the structure of CdS films was investigated.The cadmium sulfide thin films were prepared by chemical bath deposition, and were annealed at nitrogen atmosphere......
J. Cent. South Univ. (2012) 19: 1785-1790 DOI: 10.1007/s11771-012-1208-x Microstructure and mechanical properties of Al-5.8Mg-Mn-Sc-Zr alloy after annealing treatment CHEN Qin(陈琴)1, PAN Qing-lin(潘清林... recovery and recrystallization orderly occur with the increase of annealing temperature during stabilizing treatment. Only different degrees of recovery occur in the alloys annealed below 400 ℃ for 1 h......
storage alloy used as negative electrode materials for nickel-metal hydride (Ni-MH) batteries are used commercially.The effect of annealing treatment with different annealing temperature and time... examined by X-ray diffraction (XRD), automatic PCI monitoring system and electrical performance testing instruments.The optimum annealing treatment conditions of two kinds of alloys were determined......
J. Cent. South Univ. Technol. (2009) 16: 0541-0545 DOI: 10.1007/s11771-009-0090-7 Influence of surface finish and annealing treatment on oxidation behavior of Ti-48Al-8Cr-2Ag alloy XI Yan-jun...; Abstract: The effect of surface finish and annealing treatment on the oxidation......